888-721-8283

Technical Insights · November 6, 2026 · 8 min read

Eight reagents, one treatment zone: inside a chlorinated solvent injection program

A New Jersey project beneath occupied buildings shows what a modern enhanced reduction program actually contains — and why each component earns its place in the mix.

Injection hoses and field staging within the paved work area of a developed property

The short version

In October 2026, IET injected a combined chemical and biological amendment package at 19 direct-push locations on a developed property in Livingston, New Jersey. The target interval was 8 to 22 feet below grade, across a roughly 6,725-square-foot footprint hemmed in by buildings, pavement and narrow landscaped margins.

The mix was not a single product. Eight separate reagents went in: Provect-IR, supplemental zero-valent iron, calcium propionate, sodium sulfite, a nutrient blend, vitamin B2, vitamin B12 and red yeast rice. Eight reagents, four distinct jobs — and understanding which job each one performs is the difference between a product list and a design.

The complete reagent package

Reported applied masses from the final field summary. Provect-IR and supplemental ZVI are separate log entries; the ZVI tonnage is not an estimate of the iron inside Provect-IR.

Material injectedReported applied massTypical interval dose
Provect-IR5,700 lb50 lb
Calcium propionate²3,420 lb30 lb
Supplemental ZVI (1–3 µm)3,762 lb33 lb
Sodium sulfite²190 lb1.67 lb
Nutrient blend190 lb1.67 lb
Vitamin B2 (riboflavin)8,897 g (8.897 kg)78.04 g
Vitamin B12 (cobalamin)1,281 g (1.281 kg)11.20–11.24 g
Red yeast rice27,042 g (27.042 kg)237.20–237.21 g

Typical doses do not apply uniformly to GTA-15 and GTA-19. The field logs use “propionate” and “sulfite”; chemical identities follow the proposal.

Job one: react with the contaminant directly

Provect-IR · supplemental zero-valent iron

Zero-valent iron dechlorinates solvents abiotically at the metal surface. The corrosion of iron also generates hydrogen, which is the bridge into the biological half of the program. In this case the field logs record Provect-IR and a separate supplemental ZVI entry — they are not the same line item, and a reader should never add the supplemental tonnage to the product tonnage and call it total iron.

Job two: feed the organisms that consume hydrogen

Calcium propionate · sodium sulfite · nutrient blend

Dehalococcoides mccartyi does not ferment bulk organic donor. It uses hydrogen as its electron donor and acetate as a carbon source. That means the donor has to be broken down first by fermenting partner organisms, which release hydrogen and carbon metabolites the dechlorinators can use. Calcium propionate is that fermentable donor here; syntrophic propionate conversion can generate acetate and hydrogen, and hydrogen-consuming partners help the reaction proceed.

This division of labor is why reactive iron plus an organic package outperforms either alone: the iron supplies hydrogen immediately, while the donor keeps supplying it over time.

Sodium sulfite plays a supporting role here. It consumes oxygen during preparation and delivery, preserving the reducing conditions these organisms need and limiting premature oxidation of the reactive iron before it reaches the target interval.

Job three: relieve the cofactor bottleneck

Vitamin B12 · vitamin B2

Reductive dehalogenases — the enzymes that actually remove chlorine — depend on corrinoid cofactors. D. mccartyi cannot synthesize a complete corrinoid supply from scratch, so adding B12 is a deliberate attempt to remove a limitation that sits downstream of everything else. Vitamin B2 supports FMN and FAD cofactors in cellular redox metabolism. Neither vitamin creates dechlorinating capacity that the community does not already have.

Job four: manage the competition

Red yeast rice

Methanogens compete for the same hydrogen the dechlorinators need. Red yeast rice, a potential source of monacolin K, is included to limit that competing demand and reduce methane generation. The goal is allocation of donor, not sterilization: methanogens also participate in beneficial anaerobic interactions, and the response is formulation- and site-dependent.

What the field actually looked like

Delivery used direct-push tooling and an enclosed injection system. Nitrogen was introduced at roughly 150 psi until a 10 to 20 percent pressure drop indicated a pathway, then slurry went in at about 100 psi, with typical interval batches of roughly 50 gallons. Silt, sand and peat in the formation could clog the nozzle, so nitrogen purging was handled at the completion of each location rather than between intervals.

Injection tooling and hose within a narrow landscaped margin at the Livingston property
Injection tooling working a narrow landscaped margin between pavement and building — the kind of access every one of the 19 locations had to work within.

Reagent daylighted and communicated with a well near GTA-15. Rather than force the volume, the remaining GTA-15 amendments were moved to nearby GTA-19 — an adjustment that preserved the program-wide totals while changing local distribution. That is what the field adjustment in a real program looks like: the chemistry target is fixed, the distribution is negotiated with the ground.

How to prove it worked

Track the full daughter-product sequence, not just the parent compound: TCE, the three DCE isomers, vinyl chloride, ethene and ethane. Pair that with geochemistry — pH, ORP, dissolved oxygen, methane, sulfate, ferrous iron and volatile fatty acids. If daughter products stall, a microbial assay for D. mccartyi and the vinyl chloride reductase genes vcrA and bvcA tells you whether the capacity exists at all.

On this site, the October 2026 application is documented; post-injection analytical results were not supplied, so treatment performance is not yet demonstrated. We publish it that way on purpose. Implementation completion and treatment completion are different claims.

The takeaway for consultants

Reagent packages are designs, not product lists. Reactive metal, fermentable donor, oxygen scavenger, nutrients and cofactors each address a specific failure mode, and any of the eight can be added uselessly if the limiting factor is somewhere else. The most useful question to ask a remediation contractor is not what is in the mix, but which limitation each reagent is expected to remove — and how that will be measured in the monitoring data.

Reviewed by IET’s remediation engineering team · Last updated · Innovative Environmental Technologies, Inc., 6071 Easton Road, Pipersville, PA 18947